The reason that I chose the PBM-070X, is that it has the four qualities that I require in a monitor: The proper inputs, formats, and picture quality, with controls that are easy to use. The PLURA PBM-070X managed to meet all of my expectations by packing the quality and features of a big monitor into a small, lightweight package.
Let’s start with the inputs. Even HD monitors are useless unless they can accept and display the type of input that you need to use. I found no problems in that area. This monitor is truly a Multi-Format HD Monitor. Plura uses highend technology to display various kinds of digital video input signals. The PBM070X supports HD and SD SDI, Composite, RGB, YUV, Y/C, UXGA, and DVI Inputs.
It also suppor ts all HD/SD signal formats, including HD 2K, at both 50Hz and 60Hz. Very impressive for an AC/DC, 7” monitor that can be camera mounted.
The only reason that I would buy an HD monitor for my camera is to get an accurate representation of what I am recording, and Plura has done a nice job with the look and usability of this monitor.
The PBM-070X comes in an elegant slim package, with 173 degree wide viewing angle, accurate color reproduction, and quality picture consistency. In my tests, the fast response of their cutting edge de-interlacing and scaling technology, and their RGB 10 bit DSP electronics, gave me a smooth image, no matter what format I was monitoring.
Because of the high brightness and contrast ratio of this monitor, I found that I was always able to see what I was shooting, except in direct sunlight. For direct sunlight you need the optional Hood accessory.
The PBM-070X was very easy to use, since the various display controls such as time code, audio metering display, brightness, color temperature, and EQ function of HD SDI input were either on the front of the monitor, or in the user- friendly menu.
The coolest thing about this monitor is the front pushbutton controls. The Blue/Grey button cycles between Blue Only, for adjusting your color bars, Grey, for seeing how your image will look in black and white, and then back to normal video.
My other favorite button is the Waveform/ Vectorscope. Yes, that’s right, the PBM-070X has a built in Waveform (Y.Cb.Cr, selectable), and a Vector Scope that is 75%,100% selectable. That was totally unexpected on a 7” monitor. This monitor seems to have everything.
If you shoot HD, then you know that proper focus is very impor tant to the quality of your image. For checking critical images, the PBM- 070X has a Pixel to Pixel mode, which allows you to zoom in and see the actual pixels for the part of the image that will fit on the screen.
The other modes include: 16 CH Audio Metering Display, VITC, H/V delay, Blue Only, Mono Mode, Picture and Picture (PaP), Picture in Picture (PiP), Source ID display, Underscan, Overscan, Normal, Zoom, User defined Markers Display, Markers for Safe Area in HD & SD, a Tally light, Close Captioning 708 / 608, and Calibration capability. I think that it is safe to say that this monitor will be able to do anything that you need done by a 7” monitor.
The monitor comes with a built in V-mount for attaching a V-mount battery directly to the back of the monitor, and also a 4 -pin DC receptacle that I use with my Panasonic HVX-200 and DV Rig Pro setup.
To avoid having the extra weight of the Vmount battery directly over the camera, I use an Anton Bauer Hytron 140, or Dionic 90 battery on the back of the DV Rig Pro. This allows me to use the Anton Bauer QR DVX adapter to power my camera, and with the addition of the PT MULTI, and P-TAP XLR 36 adapters, to power my on-camera light and the PBM-070X monitor as well. The best part is that the battery acts as a counterbalance to the weight of the camera. This system allows me to use my camera, on-camera light, and the PBM-070X for hours on a single battery.
If you like the PBM-070X so much that you would like to use several of them in a rack, there is also a rack mount kit available. The two other options are a Hood, and a Carrying Case.
The PBM-070X is a great little monitor. I can use it on any camera, on my EZ FX jib, or as a video monitor for my portable FCP editing system. It even makes a great portable field production client monitor.
Plura’s new PBM-070X rocks, it is everything that you need in a portable 7” monitor.
David Hurd has spent over 30 years in the business, and has been writing product reviews for the last 8 years. He can be found at www.dhpvideo.com